Neodymium Block Magnet - 20mm x 20mm x 12mm | Epoxy Coating | N42H with Mid Groove | High Temp 120 deg

Neodymium Block Magnet - 20mm x 20mm x 12mm | Epoxy Coating | N42H with Mid Groove | High Temp 120 degMagnetic Product Description: This magnet has a length and width of 20mm and a height of 12mm. It has an 12mm groove which is 1mm deep. It has a magnetic flux of 4606 Gauss and a pull force of 16. 5kg. It uses AMF magnet part number 22016. Uses for our Rare Earth block magnets: To join anything to anything else is a compromise or a transaction. Fabrications usually separate at the joint. Like all compromises and transactions, costs apply. The very

This samarium cobalt block magnet has a length of 25

where heavy rain might otherwise flush metal fragments onto the roadway

Fire doors

Uses for our rare earth cylinder magnets:

These Neodymium arc magnets are much more useful than they look

Attaching a threaded eyelet or hook can also be useful in some instances and will also provide a leverage point for easy removal or repositioning as required

This Rare Earth magnet has two square flat surfaces that represent the North and South magnetic poles and has a low height profile

North and South pole surfaces are located at each flat

Documents of all kinds float in and out of our lives like a child’s paper boat down a perennial stream

they are a single sided magnet which allows for a non-destructive and easy solution for attaching and suspending objects

it has gained widespread use and has come to mean getting ready for just about anything

a total height of 98mm and a magnet housing thickness of 18mm and an M10 thread with a 7mm hook